Sticky Oil Rig?

Share post
  • Remove water from the oil rig

    1
    Remove water from the oil rig

    Remove your wax filled water by pouring it into your sink. Don’t worry, Kryptonite will make cleanup of your sink quick and easy.

    Shake Kryptonite thoroughly and pour

    2
    Shake Kryptonite thoroughly and pour

    Shake your bottle of Kryptonite and squeeze or pour it into the lower opening of your oil rig. Kryptonite is a clay-based solution with a unique coating formula which doesn’t require you to use a lot. You should be able to clean your average oil rig several times with one travel bottle. Swish the Kryptonite around until all surfaces of your oil rig are coated.

    Clean the outer surfaces of the oil rig

    3
    Clean the outer surfaces of the oil rig

    Once the inside surfaces of your oil rig have been coated, pour a small amount of Kryptonite on a sponge or rag and wipe the outside surface to remove any residue or dab marks that may remain.

    Let Kryptonite go to work for you

    4
    Let Kryptonite go to work for you

    Kryptonite works significantly faster on concentrates and shouldn’t require 30 minutes to remove all build up. However, if your pipe looks like it’s never been cleaned, you may want to give it the full 30 minutes.

    Clean the nail

    5

    Now that you’ve coated all inner and outer surfaces of your rig with Kryptonite, you can focus on cleaning the nail. If there’s a lot of carbon buildup on the nail you may want to use a hard, sharp surface to scrape any big deposits off. Place the nail into a Ziploc bag and add a small amount of Kryptonite and make sure the nail is coated with Kryptonite. Let sit for 5-10 min

    Rinse with warm water

    6
    Rinse with warm water

    After coating all surfaces of your oil rig and nail with Kryptonite and letting them sit, all that’s left to do, is rinse them with warm water, let them dry and enjoy!

    Share post