How to clean your extraction equipment

Share post
  • Cleaning Extractor Equipment

    KLEAR™ Cannabis Extractor Cleaner was engineered in a lab to remove plant matter, waxes, and concentrate extracts. It immediately washes clean with warm water and is designed to be diluted with water to work with tools, cannabis grow trays, glass, metals, and all other hard surfaces.


    The general process of using  KLEAR™ Cannabis Extractor Cleaner is to coat your equipment with our solution, let it soak for 30 minutes and then rinse. To speed up the process, you can soak for less time and brush.


    1.  Get a soaking tray or other device in which you can put  KLEAR™ Cannabis Extractor Cleaner and your equipment.
    2. Dilute the Extractor Cleaner at 1 part cleaner to 5 parts water and put it into the soaking container.
    3. Remove all major plant matter that is on your equipment. 
    4. Place the equipment into the soaking container with the diluted Extractor Cleaner
    5. Let the equipment soak for 30 minutes. Or, once coated, you can begin to brush the equipment. We recommend you let it soak for 15 minutes, then brush as needed.
    6. If you want to save a little money, you can save the diluted Extractor Cleaner and use it again. Our experience is that you can use the diluted cleaner as many as five times before you need to dump it. One nice thing about our cleaners is that dumping it is not going to be hazardous to the environment.
    7. As with all of our instructions, the final step is to thoroughly rinse everything with warm water until is is shiny clean and then dry as needed.
      Share post