Cleaning with KLEAR™ Extractor Cleaner

Share post
  • KLEAR™ Extractor cleaner uses the same non-toxic oil dissolving ingredients as KLEAR™ Kryptonite and KLEAR™ Naked. Extractor cleaner is very concentrated and is diluted before use. What you are cleaning determines how much you should dilute it.

    Before you start

    You may want to have a spray bottle, measuring cup and a sponge. For your convenience, here’s a few we like below. Click to see them online at Amazon/Walgreens.

     

     

                  .          

    Dilution Information

    Most of the time, you can dilute Extractor cleaner so that it lasts longer. How much you dilute Extractor cleaner depends on what you are cleaning. Here’s some recommendations below. In the table below, we show some items, the amount of dilution, and a method for cleaning that item. The methods of cleaning are further explained below the table.

     Cleaning:

    Ratio

    Extractor Cleaner

    Purified Water

    Method

    Display Jars

    1 to 20

    1/2 OZ 10 OZ Spray Bottle
    Scissors 1 to 20 1/2 OZ 10 OZ Spray Bottle
    Stainless Bowls 1 to 10 1 OZ 9 OZ Spray Bottle
    Extraction Tubes 1 to 2 8 OZ 8 OZ Tray Bath
    Pyrex Glass 1 to 2 8 OZ 8 OZ Direct Application
    Dab Rigs 1 to 1 Not Diluted Not Diluted Direct Application

    Methods

     

    Spray Bottle Method

    Dilute the Extractor cleaner by mixing the recommended amount of cleaner and water into a spray bottle.

    1. Spray the item with the solution
    2. Use a clean sponge to wipe down the item
    3. Rinse with water and let dry

    Tray Bath Method

    1. Dilute the extractor by mixing the recommended amount of cleaner and water into a tray so that you can put your items in the tray and they will be covered with the cleaning solution
    2. Let your items soak on the solution for about 10 minutes
    3. For very dirty items, scrub them with a sponge or a tube brush as needed
    4. Rinse with water and let dry

    Direct Application

    1. Pour the pre-mixed solution into the item being cleaned or rub on with a sponge dipped in solution
    2. Let it soak for about 10 minutes
    3. For very dirty items, you might want to scrub using pipe cleaners, brushes, etc.
    4. Rinse with water and let dry

     If you have questions, feel free to email us at: sales@klearkryptonite.com

     

    Share post